![]() Yes! Along with the built in FreeAgent Go Dock, you can connect another 3, USB 2.0 devices to your FreeAgent DockStar that all show up under your account. What drive formats will work with my FreeAgent DockStar?ĭrives formatted with NTFS, FAT32, Mac OS Extended Journaled and non-Journaled (HFS+), and EXT-2/EXT-3 are fully supported by FreeAgent DockStar.Ĭan I attach multiple hard drives to my FreeAgent DockStar? How do I know if FreeAgent DockStar will work with my drive?įreeAgent DockStar is compatible with any external USB 2.0 hard drive or memory stick. When using DockStar, users will be sharing their on-line memories (pictures, music, videos, documents, etc) via the Pogoplug website. Seagate Technology has partnered with Pogoplug to bring you the FreeAgent DockStar. If you have made a backup of md0 while hacking, use it instead (again, caveat emptor that you may brick the Pogoplug device forever.I see several references to Pogoplug in conjunction with FreeAgent DockStar – why? Important: Note that the downloaded .kwb may be of very old version. Run the command command in SSH console of the Pogoplug device one by one: However, if you have problem to boot the original firmware, try the following trick to restore original uBoot bootloader, but note that you risk brick the Pogoplug device rendering it unbootable and unusable. Note that it’s not necessary to restore Pogoplug, DockStar or GoFlex Net to original uBoot bootloader in order to regain full Pogoplug functionality. Uncomment the following line (remove the # sign):.Edit the rcS file with any text editor, such as vi.Run the following command to mount the filesystem with read-write access and change directory:.The default user name and password is as follow, but your device may have different password if changed. Once established connection, login as root.SSH into the Pogoplug device at port 22 (you have to figure out its IP address on your own).Boot into the default original Pogoplug or DockStar and GoFlex Net environment.If you’re original stock Pogoplug firmware installation is intact on mtd1 and mtd2, and the new uBoot has ability to revert to boot the stock firmware, here’s the way to re-enable and turn on the Pogoplug service in stock firmware. While most custom uBoot for Pogoplug can load original stock firmware for default Pogoplug system (assuming the original firmware is not overwritten or replaced with custom firmware installed on USB flash drive) by a simple command on SSH console or plugging out the boot USB device with custom hacked firmware, without the Pogoplug environment with access which connects to my. or, the ability to easily revert to stock firmware can be considered useless. If you have disabled and turned off the Pogoplug service, it means that you cannot make use of my. or to manage or access the device anymore. In order to avoid Pogoplug environment from restoring original firmware, the custom uBoot installer will normally ask if user wants to disable the Pogoplug environment, with the default answer as Yes. The custom new uBoot is installed to replace original Pogoplug (Dockstar and GoFlex Net) uBoot at mtd0. When setting up and modified the Pogoplug, Seagate DockStar or Seagate GoFlex Net, the custom firmware normally does not contain my. or service, which requires proprietary drivers that custom firmware does not have.Īnd in order to be able to boot into the new firmware, a custom modified uBoot that contains several changes from Pogoplug default bootloader has been installed. Debian, OpenPogo or Pogoplug Linux) or run OpenWRT and etc. Many hackers and technical savvy has installed custom firmware onto Pogoplug device to run applications (e.g. The Pogoplug, and its variants such as Seagate FreeAgent DockStar and Seagate GoFlex Net, is a plug computer that originally intend to serve as a personal cloud to share photos, videos and files through Internet.
0 Comments
Leave a Reply. |